Organizing Tote Basket Tutorial
(Allow 3-4 hours to complete)

Materials Needed:
* cotton fabric about 1 yard
*fat quarter of flannel fabric or light weight stabilizer
*1/2 yard of terrycloth, fleece or medium weight stabilizer
*70" of bias tape or make some if you have enough fabric.
Cut the following from the cotton fabric: (Make sure you letter each piece of fabric as you cut them out. It will make assembling the organizer much easier.)
A: 6 pieces at 9 1/2" x 7 1/2" (sides and bottom of organizer)
B: 4 pieces at 7 1/2" x 7 1/2" (sides of organizer)
C: 2 pieces at 9 1/2" x 10 1/2" (side pockets)
D: 1 piece at 7 1/2" x 10 1/2" (side pocket with slots)
2 pieces at 17" x 3" (handles)
Cut the following from terrycloth, fleece or medium weight stabilizer:
A: 3 pieces at 9 1/2" x 7 1/2" (sides and bottom)
B: 2 pieces at 7 1/2" x 7 1/2" (sides)
Cut the following from the flannel or lightweight stabilizer:
1 piece at 7 1/2" x 5 1/4" (stabilizer for the pocket with slots)
2 pieces at 9 1/2" x 5 1/4"(stabilizer for the longer pockets)
**Bias tape**
You will need about 70" of bias tape. You can either buy some bias tape or make it yourself. I had plenty of fabric so I made my own bias tape.
For now you will be working with just the following pieces: the bias tape, the 3 pieces of flannel, 2C pieces & 1 D piece.

Fold one C piece in half, wrong sides together with the 9 1/2" x 5 1/4" piece of flannel folded in the middle. Iron flat.
Cut off a 9 1/2" piece of bias tape.
Unfold the bias tape. Place the top edge of the bias tape onto the folded edge of the fabric.
Sew bias tape on. If you are using homemade bias tape, do not sew in the ditch, sew in a little bit. If you are using store bought bias tape line up the shorter side on the top edge and sew in the ditch.
Now fold bias tape up.